Ceiling jacks
Ceiling jacks are one of the most common components of concrete molding such as the shuttering of beams, roof molding, etc. These jacks are made in two forms: fixed and movable series. In the moving series, it is possible to replace the cross series with a U-shaped sole and a simple sole.
This type of jack is used to control static and dynamic loads on the mold at heights of less than 5 meters. The advantages of this jack include economic efficiency and ease of use.
Technical Specifications
- The ceiling jack is produced in two forms: fixed and movable series, which is provided according to the customer's needs. These jacks are available in standard lengths of 3.5, 4 and 4.5 meters.
- These jacks consist of three basic parts, a jack thread and a restraint tube (cross). Despite the holes embedded in the pipe, the top of the initial position is fixed by a pin and the distance is adjusted with higher accuracy by the jack thread.
- The technical specifications of these jacks can be seen in the table section of ceiling jacks.
Do you need any consultation?
Our experts are ready to answer your questions from 8 A.M to 8 P.M