secound hand scaffolding(used stuff)
Types of Second hand scaffolds are as follows
Triangular modular scaffold
This type of scaffold are composed of triangular frames that are connected to each other in form of male and female and are used in alachigh slab or beam as well as bridges. The frame of this type of scaffold are produced at a height of 50 cm, 75 cm and 1 m that by placing a reglable jackhead at the top of the scaffold can be adjusted to any height. Triangular scaffold can be assembled with square section with dimensions 120 x 120 cm or triangular with sides 120 cm. This type of scaffold due to the ease of performing is the most common type of scaffold in running high ceilings.
The advantages of using a triangular scaffolds are as follows
A - ease and speed of opening and closing, and no need for a wrench to close the connection.
B – high load bearing in alachigh concrete slabs due to having constant diagonal members.
C - No need for a skilled labor and assembly by unskilled labor.

.

Star Hammer Scaffold

This type of scaffold is composed of vertical bases and horizontal harnessing of different sizes. The bases of these scaffolds are produced with lengths 5/0 m, 1 m, 5/1 m, 2 m, 5/2 m and 3 m and by placing reglajeble jackhead on upper and reglajeble jack base on the bottom of scaffold, they become adjustable for both height and level difference. Mounting horizontal harnessing on the basis of scaffold is possible easily with the hammer and scaffold bases connection to each other are made by pin.

Benefits of using hammer scaffolds are as follows:

A – Ease and speed of opening and closing, and no need for a wrench to close the connection.

B – expansible in plan and height without restriction.

C – No need for harnessing at high height.

D – applicable in scaffolding of buildings frontage or refinery installations and ….

E – High load bearing in alachigh concrete slabs

F – No need for scaffolding skilled labor and assembly by  unskilled labor.

G – Ease of handling and transfer due to lightweight components.

H – For use in alachigh non-coplanar and arc ceilings

Star Hammer Scaffold
This type of scaffold is composed of vertical bases and horizontal harnessing of different sizes. The bases of these scaffolds are produced with lengths 5/0 m, 1 m, 5/1 m, 2 m, 5/2 m and 3 m and by placing reglable jackhead on upper and reglable jack base on the bottom of scaffold, they become adjustable for both height and level difference. Mounting horizontal harnessing on the basis of scaffold is possible easily with the hammer and scaffold bases connection to each other are made by pin.
Benefits of using hammer scaffolds are as follows:
A - Ease and speed of opening and closing, and no need for a wrench to close the connection.
B – expansible in plan and height without restriction.
C – No need for harnessing at high height.
D – applicable in scaffolding of buildings frontage or refinery installations and ….
E – High load bearing in alachigh concrete slabs
F - No need for scaffolding skilled labor and assembly by unskilled labor.
G - Ease of handling and transfer due to lightweight components.
H - For use in alachigh non-coplanar and arc ceilings
Drum Hammer Scaffold
This type of scaffold is composed of vertical bases and horizontal harnessing of different sizes. The bases of these scaffolds are produced with lengths 60 cm, 120 cm, 180 cm, 210 cm, and 3 m and by placing reglable jackhead on upper and reglable jack base on the bottom of scaffold, they become adjustable for both height and level difference. Mounting horizontal harnessing on the basis of scaffold is possible easily with the hammer and scaffold bases connection to each other are made by pin.
Benefits of using hammer scaffolds are as follows:
A - Ease and speed of opening and closing, and no need for a wrench to close the connection.
B - expansible in plan and height without restriction.
C - no need for harnessing at high height.
D - applicable in scaffolding of buildings frontage or refinery installations and etc.
E - High load bearing in alachigh concrete slabs
F - no need for scaffolding skilled labor and assembly by unskilled labor.
G - ease of handling and transfer due to lightweight components.
H - for use in alachigh non-coplanar and arc ceilings